Electronics Test Technician I/II

Torrance, CA
Full Time
Operations
Entry Level
Intellisense Systems, Inc. is a privately held company with a proven track record of developing and deploying innovative products that successfully operate in the most extreme environments.  We are a fast-growing Southern California technology innovator that solves tough, mission-critical challenges for our customers in the aerospace, defense, and commercial markets.  We design, develop, and manufacture advanced products for ground, maritime, and airborne applications.

We are seeking a motivated and skilled Electronics Test Technician to join our Operations Team in Torrance, CA.  The successful candidate will have electronics and mechanical manufacturing test experience and will operate, troubleshoot, and support test systems and equipment used to verify the performance and reliability of integrated electro/opto/mechanical systems.

This position is open to both Level I and Level II candidates depending on experience. Level I technicians work under routine supervision on established test procedures, while Level II technicians independently troubleshoot more complex assemblies, perform failure analysis, and provide technical guidance to less experienced technicians.

Location: Torrance, CA
Work Schedule: Monday – Friday | Shift 11:00am – 7:00pm

Responsibilities:
  • Perform board and system-level programming, functional testing, and ATP/EOL testing and verification using automated and manual test fixtures.
  • Troubleshoot electronic, electrical, optical, and electromechanical assemblies to the component, board, cable, or system level using schematics, drawings, and test procedures.
  • Perform failure analysis and root-cause troubleshooting; document findings and support nonconformance, corrective-action, and rework activities.
  • Set up, operate, and maintain test equipment and fixtures, including ESS, thermal cycling, vibration, and HALT equipment; identify equipment issues and coordinate calibration or repair.
  • Support new product introduction (NPI), prototype builds, engineering evaluations, qualification testing, and transition of products into production.
  • Perform optical alignment, fiber-optic inspection/cleaning, and optical performance testing.
  • Capture, review, and document test data as part of production automated test procedures (ATP) and product traveler documentation.
  • Work with engineers, quality, and manufacturing personnel to improve test procedures, fixtures, and production processes.
  • Perform product assembly and rework as needed, including cable/harness work and mechanical assembly.
 
Requirements:
  • Associate degree in electronics, electrical technology, engineering technology, or a related technical field preferred; equivalent military or directly relevant technical experience will be considered in lieu of a degree.
  • 4-6 years of experience in an engineering or manufacturing test environment, including independent troubleshooting of electronic or electromechanical products; candidates with 2-3 years of experience (Level I) may also be considered.
  • Experience with automated test fixtures, printed circuit board assembly and testing, cable/harness production, ESD control, and handling of optical components.
  • Working knowledge of electrical circuits, schematics, wiring diagrams, mechanical drawings, and computer interfacing.
  • Excellent verbal and written communication skills, including the ability to produce clear technical test and failure-analysis documentation.
  • Availability to work occasional overtime & weekend shifts.
 
Nice to Haves:
  • LabVIEW, ESS/chamber programming, data-acquisition, or automated test software experience.
  • Current IPC-A-610, J-STD-001, or equivalent solder/workmanship certification.
  • Prior experience mentoring or training less experienced technicians.
 
Please note: Job responsibilities within our organization are dynamic.  This may not be a complete list of duties.  Other responsibilities and duties may be assigned by your supervisor or upper management at any time.

Pay Range: $25.00/hr - $36.00/hr DOE

Benefits:
  • 4 Weeks PTO a year (including 40 hours of PTO your first day)
  • 10 paid holidays
  • 401(k) with 100% employer matching up to 4% of salary (no vesting period)
  • Multiple options for Medical, Vision, Dental Insurance plans
  • Health Savings Accounts
  • Flexible Spending Accounts
  • Tuition Assistance (30% of Tuition with a minimum qualifying grade)
  • 100% Paid Employee Assistance Program (EAP)
  • 100% Paid Basic Life and AD&D Insurance
  • 100% Paid Workers Compensation Insurance
  • Voluntary Life Insurance
 
The unique culture at Intellisense offers the entrepreneurial spirit of a smaller company with the support and expertise of a larger organization. We are looking for individuals that have a wide breadth of experience while also being subject matter experts in their respective field.

If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact us by phone at (310) 320-1827 or by email at [email protected]

Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S. Citizenship, U.S. Permanent Residency, or other status as a U.S. Person as defined by 22 CFR § 120.62. Intellisense Systems, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants, including protected veterans and individuals with disabilities. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or other legally protected status.

REQ #26046
 
Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file


Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status



Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 07/31/2029
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*